When you're shopping for exterior cladding facade products, the choice often comes down to covering the right span at the right price. Two aluminum composite panels from Arizona Inventory address this with a simple trade-off: one offers an 11.5-foot length, the other a 10.5-foot length. The extra foot changes the coverage and the listed price.
Quick verdict: If your sign face fits within 10.5 feet, the shorter panel is the practical choice because it carries the lower listed price. If you need a full 11.5-foot run without a seam, the longer panel justifies its higher price. Both are listed as new open box units from Arizona Inventory, and they share the same 50-inch width and 0.15-inch thickness, so the material profile is identical. The only real trade-offs are length and the $10.01 price spread.
| Panel | Listed Price | Length | Width | Thickness | Price Bar |
|---|---|---|---|---|---|
| 11.5' Aluminum Composite Panel | USD 115.01 | 11.5 ft | 50 in | 0.15 in | |
| 10.5' Aluminum Composite Panel | USD 105.00 | 10.5 ft | 50 in | 0.15 in |
Where the 11.5' panel wins: If your exterior cladding run is more than 10.5 feet, the longer sheet avoids a mid-face seam and keeps the surface continuous. It's the only way to cover an 11.5-foot span with a single panel in this pairing. It also means less cutting if your layout is close to that full length.
Where the 10.5' panel wins: For smaller sign faces or modular cladding sections, the shorter sheet is easier to handle on site and leaves more budget for other materials. If a 10.5-foot run covers your design, you avoid paying for length you won't use.
11.5' Aluminum Composite Panel
The longer panel earns its place when your exterior cladding needs to span a full 11.5-foot run without a joint. Its extra foot of length is the clearest advantage, letting you cover a larger sign face in one continuous sheet. It is the only one of the two that can cover an 11.5-foot span as a single piece, so if your design calls for that reach, there's no need to piece together two smaller sections. The limitation is the higher listed price, so you are paying more for coverage you may not use if your layout fits within 10.5 feet. For storefront signs, building facades, and large-format displays, this extra length can simplify installation by reducing joints.
10.5' Aluminum Composite Panel
Reach for the shorter sheet when your sign face stays within a 10.5-foot length. It carries the lower listed price of the two, which frees up budget for framing, fasteners, or finishing touches. If your cladding run fits that length, you avoid paying for an extra foot you don't need. The trade-off is that any run beyond 10.5 feet will require a second sheet or a seam, so you need to be sure your design doesn't depend on that additional length. For compact facades, retail displays, and DIY cladding projects, this panel offers a more budget-conscious footprint.
Final choice by use case: If your exterior cladding run needs the full 11.5-foot span, the longer panel is the one to buy. If a 10.5-foot run covers your project, the shorter panel keeps more cash in hand. Measure your sign face, compare the two lengths, and let the actual coverage requirement settle the decision.
