Any masonry project, whether it's a garden bed border or a freestanding wall, depends on uniform mortar joints. Without consistent spacing, the courses wander and the finished surface looks off. Masonry mortar joint spacers solve that by holding a consistent gap while you lay block and brick. The real decision is how many spacers your job requires and how much you want to spend before you start. That's where these two options diverge: one delivers 500 spacers for USD 100.00, and the other delivers 100 spacers for USD 20.00. Neither gives you a cost advantage per spacer, so the choice is about scale and cash flow.
Quick verdict
Both are new masonry mortar joint spacers made in the United States and designed for DIY block and bricklaying. The 500-pack costs USD 100.00 and the 100-pack costs USD 20.00. That works out to the same 20 cents per spacer, so the choice comes down to project size and upfront spend. If you're stocking up for a big job, the 500-pack covers more ground. If you want a lower entry price or only need a modest number, the 100-pack is the lighter buy.
Price comparison
| Product | Listed Price | Price Bar | Pack Count | Per-Spacer Equivalent |
|---|---|---|---|---|
| 500 Masonry Mortar Joint Spacers | USD 100.00 | 25 packs of 20 | USD 0.20 | |
| 100 Masonry Mortar Joint Spacers | USD 20.00 | 5 packs of 20 | USD 0.20 |
Where each product wins
- 500 Masonry Mortar Joint Spacers win for larger masonry jobs where running out mid-project would cost you time. The 25-pack layout also lets you distribute a few packs to multiple workers.
- 100 Masonry Mortar Joint Spacers win for small repairs or when you want to test the spacers on a practice wall before committing to a bigger quantity. The lower total spend is friendlier to a one-off budget.
Product notes
500 Masonry Mortar Joint Spacers
This is a bulk buy: 25 packs of 20 spacers give you a full 500 pieces to work through. If you're laying a substantial run of block or brick, the quantity means fewer interruptions to resupply. The listed price is USD 100.00, which is the larger outlay of the two. For a very small project, you might end up with more spacers than you need, but the per-piece value matches the smaller pack exactly.
100 Masonry Mortar Joint Spacers
The 100-pack carries a USD 20.00 price and provides 5 packs of 20 spacers. That's enough to handle a modest segment of block or brick work or to try out the spacer method without a big cash commitment. One thing to keep in mind: the spacer's low fire resistance plastic can melt or deform at high temperatures, so it's not the right pick for applications near intense heat or fire.
Final choice by use case
If your project calls for a high volume of spacers and you want to keep the job moving, go with the 500-pack. If you're doing a short wall or just want a smaller financial commitment, the 100-pack is the sensible buy. Because both options carry the same per-spacer price, you can choose based on total quantity and budget rather than worrying about getting a worse deal on either.
