When an exterior wall corner meets a lawn mower or a scrape from a cart, the siding can crack, chip, or split. That's why exterior cladding facade products like aluminum corner guards exist. The decision can stall, though, when two options appear completely identical. Here, the two 2-packs of 89° angled aluminum exterior wall corner guards share every meaningful specification.
Quick verdict
Choose either pack. There is no meaningful difference in listed price, material, included hardware, or installation method. Both are white 2-packs with an 89° angle. The one that makes sense for you is simply the one you pick.
At a glance
| Detail | Each pack |
|---|---|
| Price | USD 26.20 |
| Color / finish | White |
| Material | Aluminum alloy |
| Guard dimensions | 3-3/8" × 3-3/8" × 15-3/4" |
| Included hardware | 2 corner guards + 12 screws |
| Mounting | Pre-drilled holes, screw-mounted |
| Gross weight | 0.55kg / 1.21 lbs |
Where each pack wins
Where the first 2-pack wins
The first set is the right call when you want a straightforward corner guard for a standard 89° outside wall corner. It covers the corner cleanly, and the included screws line up with the mounting holes for a direct installation.
Where the second 2-pack wins
The second set is equally suited to the same 89° corner. It carries the same finish, the same mounting hardware, and the same protective profile. If you are protecting a corner that gets struck by a mower, either set addresses that impact point.
Product notes
2 PCS 89° Angled Aluminum Exterior Wall Corner Guards (First 2-Pack)
The first corner-guard set is built for the exposed outside corner of a house. Each guard is 3-3/8 inches by 15-3/4 inches, so the pair covers a practical vertical span while keeping the profile compact. The spray-coated surface resists rust and weathering, and the 89° angle is designed to hug typical wall corners. It arrives with fasteners, and the mounting holes are ready for a mechanical fix. The main limitation is that this is a screw-mounted product, so you'll need a drill or screwdriver and a surface that accepts fasteners; it is not a peel-and-stick corner guard. Choose it for a permanent hold on vinyl siding, wood, concrete, or brick corners.
2 PCS 89° Angled Aluminum Exterior Wall Corner Guards (Second 2-Pack)
The second corner-guard set is the same 2-pack of guards, and it earns its place for the same exposed-corner problem. It shields a meaningful strip of siding from scrape damage and sits flush against corners that are close to square. The spray-coated surface handles sun and moisture exposure, and the 89° bend helps keep the guard aligned with the wall. The set includes the screws needed for a straightforward installation. One thing to remember is that the guards are designed for a specific angle and length; if your corner profile or wall height differs, you may need additional sections or a different bend. Otherwise, this pack performs identically to the first.
Final choice by use case
Pick the first 2-pack if you want a complete corner-guard kit for a standard outside corner and you prefer a mechanical screw fix over adhesive strips. Pick the second 2-pack if you are doing the same job and that unit is the one you have at hand. For a typical vinyl-siding corner, both sets deliver the same protective effect: a shield that absorbs scuffs and helps keep cracks from reaching the siding. If you need to cover more than one corner or a taller surface, you will need additional packs or longer corner guards; neither 2-pack covers an entire wall by itself.
