Quick Verdict
If you're insulating floor or ceiling cavities with 24-inch on-center framing, you need a way to keep the insulation from sagging. The THEWORKS 24 In. Insulation Support (100-Pack) is a simple, low-tech solution: 100 pre-cut 13-gauge steel wires that you push into place. At USD 14.65, it's an inexpensive way to buy consistency for a job that can be tedious.
Who It Suits
This pack is for anyone working in crawl spaces, attics, or open joist bays where the framing is spaced 24 inches apart. Because the supports are pre-cut to 24 inches, you don't have to measure each bay. You just place the wire between the framing members to hold the insulation up. If you're doing a larger project and want the same support across many bays, buying a 100-pack means you won't run out mid-job.
What Stands Out
The support wires are made from 13-gauge steel, which gives them enough rigidity to hold a batt in place without bending easily. The product is classified as an insulation accessory and is pre-cut, saving you the cutting step. The description specifically mentions it's easy to install-simply push it into place-which is a big plus in tight, awkward spaces like crawl spaces where you don't want to deal with fasteners or tools.
Meaningful Trade-offs
The obvious trade-off is that these are sized for 24-inch on-center framing only. If your studs or joists are on a different spacing, these supports won't line up correctly. The wires are also steel, so they're not the same as rigid insulation hangers; they rely on the friction of being pushed into place between framing members. That works fine for many standard installations, but you should buy this pack with that specific framing spacing in mind.
Bottom Line
The THEWORKS 24 In. Insulation Support (100-Pack) is a straightforward, purpose-built product for keeping insulation in place in 24-inch framing. The price is modest, the steel is a proven material for this job, and the pre-cut length eliminates a repetitive measuring step. If you're tackling an insulation project with that framing spacing, this pack is a sensible pick.
24 In. Insulation Support (100-Pack)
This 100-pack gives you a job-ready supply of insulation supports for 24-inch on-center framing. Each wire is 13-gauge steel, described as easy to install by pushing it into place. It's particularly useful in crawl spaces where access is limited, and the pre-cut nature means you can move quickly from bay to bay without cutting pieces to size.
